Path: Home > List > Load (beadsout.org)

Summary
This is a classic "Beads Out" level glitch where the game logic has changed slightly. The issue usually lies in how many beads have passed the conveyor at the end of the current loop, or in how the "Bad Tap" affects the remaining capacity.

Here is the step-by-step Level 571-580 Walkthrough, including the explanation of the problem and solutions.

---

### ⚠️ Immediate Warning: Level 571-580 Issues
Before attempting, please understand the current state of this level:
1. Capacity Check: At the very start (Level 570-571), usually 5 beads are visible.
2. The "Bad Tap": After a bad tap, the conveyor speed increases drastically.
3. The Problem:
* Scenario A (Level 581): If you reach Level 581, the conveyor moves so fast that the last few beads (590-600) have passed over the conveyor. Since beads only pass once per cycle, the loop resets instantly. You might not even reach Level 601.
* Scenario B (Level 571-580): The loop is stuck because the beads are not resetting. The conveyor moves past them faster than the bead-to-bead speed of the game can process.
* Scenario C (Level 570+): The initial setup is often suboptimal. Beads out games rely on a very specific pattern. If the loop count (5) is too high for the speed, it resets too early.

Strategy for Levels 581-600:
* Do not jump to Level 581 immediately.
* Use Option B in the game editor: Move beads out from the end (or the beginning depending on the mod's settings). This forces the speed to drop, keeping the game loop alive long enough to see the bead-to-bead speed.
* If you reach Level 581, you are guaranteed a reset. Use Option A (Keep the loop count high) in the game editor to wait longer for the game engine to process the movement before the loop restarts.

---

### ✅ Detailed Level 571 Walkthrough (The "Hard" Loop)
*Goal: Keep the game loop running long enough to observe the bead-to-bead speed.*

1. Position the Bead (Level 570):
* Hold your bead.
* Move the whole loop so the bead is perfectly centered in the middle of the conveyor.
* *Do not move it too fast.*
2. Start the Cycle:
* Go to Level 571.
* Crucial Step: Move the beads out of the loop or click the Move Beads option in the game editor to ensure the speed is low enough. If the speed is too fast, Level 571 might be unplayable due to the reset.
3. The Cycle:
* Tap the button. The loop resets to Level 572.
* Now, watch the loop continue. The bead should be in the middle, and no other beads should pass it during the entire cycle.
4. Identify the Problem:
* Watch closely as the cycle ends.
* Do you see beads pass the bead?
* If Yes: The game engine has processed the movement faster than the cycle allows.
* *Solution:* In the game editor, click Move Beads Out from the end (or beginning) to lower the speed. Then, if you are at Level 581 or 582, wait for the game to reset properly so you don't lose the next level.
* If No: The game engine is very slow, or you are at an extreme end of the loop (560-570). If you are at Level 570+ and still see beads passing, the levels are likely suboptimal for the mod. In this case, do not try to play Level 571+. The game engine may have bugs preventing the next cycle from processing correctly.

---

### 🚀 Cheat Tips for Levels 571-580

#### 1. The "Reset" Trick (For Levels 572+)
Since the game logic has changed (likely due to the Bad Tap), the game engine might not recognize the next level correctly if the loop is stuck.

* Game Editor (Edit > Settings > Beads Out Settings):
* Find `Loop Count`.
* Lower it. Start with 4 or 5 if the mod supports it, otherwise keep it higher (like 10 or 12).
* Look for `Max Beads` or `Bead Count`. If there are too many beads, lower this to 3-4.
* Why? The game engine needs a small enough cycle to reset properly. If you have 10 beads, the game thinks it's a "Level 10" when it's just restarting.
* Alternative Cheat: `Move Beads Out from the end` (Game Editor > Move Beads Options). This forces the conveyor to move very slowly so it can still reset before restarting.

#### 2. Understanding the "Bad Tap"
The text "conveyor is almost full, one bad tap clogs the whole lane" explains why the loop resets.
* Cause: The loop finished counting, and the conveyor was faster than the "bead-to-bead" speed of the mod.
* Fix: This usually means your game speed or the mod's bead-to-bead speed is off. If you can't play it, the levels are probably broken (Level 570+).

#### 3. If you get stuck at Level 580-600
* Level 581: You are in the reset loop. You must use the Move Beads Out feature in the game editor to make the speed low enough so the game engine processes the next level without a reset. Once you are at Level 601, the loop should work fine again if you keep the settings stable.
* Level 600: At this point, the loop has likely reset multiple times. You can try Level 600 again if the game engine handles it, but if you hit Level 601, you must ensure your game speed or mod is fine.

---

### 🎮 How to Jump to a Specific Level (Optional)
Since the levels are not numbered directly in the game editor like standard levels (Level 109, etc.), you need to use the Jump Level feature:

1. Go to Level 570 in the Beads Out game.
2. In the Edit window, scroll to Jump Levels (or Settings > Jump Levels).
3. You will see numbers like `570, 571, 572`.
4. Go to Level 572:
* In the Game Editor, click on the Level 572 number.
* This will jump directly to the game level where you want to start the specific sequence (usually Level 573 for 572-573-574-575-576-577-578-579-580-581).
5. Once in the game, try Level 571 to see if the level resets cleanly before jumping back to the game editor.

### Summary Checklist
1. Do not jump to 581 yet. Wait longer or reduce bead count in the editor.
2. If seeing beads pass: Use the Move Beads Out feature in the game editor to lower the speed.
3. If still having problems: It is likely the game engine has a bug regarding bead-to-bead processing at Level 570+. You should abandon Levels 571-580 and use standard levels (601-620) or just the levels you can play comfortably.
4. Edit > Settings > Beads Out Settings to adjust `Loop Count` and `Bead Count` if you are struggling to play Level 571.
Title
Beads Out Full Level Solution Walkthrough, Cheat & Tips
Description
Get instant solution for Beads Out levels. Beat Beads Out levels with our step by step guides, easy to follow walkthrough. Tips and cheats for Beads Out.
Keywords
levels, beads, level, boxes, conveyor, game, full, board, color, play, games, space, fast, puzzle, first, boosters, solution
NS Lookup
A 104.21.48.121, A 172.67.151.58
Dates
Created 2026-04-12
Updated 2026-04-12
Summarized 2026-04-12

Query time: 944 ms